600013 ViSolid® 700 IQ SW
用于工业和海水应用（超声波清洗）的数字悬浮固体传感器，与IQ sensor NET系统配合使用。请单独订购连接电缆。
-
Digital suspended solids sensor with ultrasonic cleaning, connectable to the IQ SENSOR NET
ViSolid®: Optical sensors for the in-situ use to measure suspended solids via scattered light and direct back-scattering with ultrasonic cleaning system:
- Ultrasonic cleaning without mechanics
- Extremely low-maintenance
- Highly accurate factory calibration
- High operational safety (sensor check function)
The ultrasonic cleaning system ensures the low-maintenance and continuously reliable measuring operation of the sensors, which are therefore very suited for extreme applications, such as wastewater treatment plants.
With higher particle concentrations, the procedures of turbidity measurement are only suitable in some cases; here, you will need special measuring techniques to determine the concentration. WTW uses two procedures, which are used depending on the suspended solids concentration: With low concentrations, a scattered light measurement is used; for higher concentrations, the direct back-scattering yields optimal results.
The sea water model includes the sensor for use in special media: All wetted parts are made of titanium and plastic and are therefore extremely resistant to corrosion.Model
ViSolid® 700 IQ
ViSolid® 700 IQ SW*
Order No.
600012
600013
* SW: Sensor as sea water model (with plastic arming (POM)) Measuring method
Procedure for measuring scattered light
Measuring range
g/l SiO2
% SiO20 ... 300 g/l SiO2
0 … 30% SiO2g/l TSS
% TSS0 ... 1000 g/l TSS
0 … 100% TSSResolution
g/l SiO2
% SiO2Automatic according to measuring range 0.1 mg/l ... 1 g/l
Automatic according to measuring range 0.001 % ... 0.01 %g/l TSS
% TSSAutomatic according to measuring range 0.1 mg/l ... 1 g/l
Automatic according to measuring range 0.001 % ... 0.1 %Calibration
Typical sludge characteristics stored: matrix type 1, matrix type 2
Calibration by user: adjustment via correction factor, 1-point or multi-point calibration possibleCleaning System
Ultrasound cleaning system
SensCheck
Contamination detection of optical window; failure of cleaning system
Pressure Resistance
10 bar (incl. sensor connection cable)
Ambient Conditions
Operating temperature: 32 ... 140 °F (0 ... 60 °C);
ultrasonic cleaning system: 32 ... 104 °F (0 ... 40 °C) (overheating protection);
Storage temperature: 23 ... 149 °F (-5 ... +65 °C)Electrical connections
2-wire shield cable with quick fastener to sensor
Electromagnetic
Compatibility
EN 61326, Class B, FCC Class A;
Intended for indispensable operationCertifications
CE
Mechanical
Measuring window: Sapphire;
Sensor body: V4A stainless steel 1.4571;
Sensor head: V4A stainless steel 1.4571;
Protection rating: IP 68Measuring window: Sapphire;
Sensor-body: Titanium, POM
Sensor head: Titanium;
Protection rating: IP 68Weight (without cable)
Approx. 2.18 lb (900 g)
Approx. 3.13 lb (1420 g)
Warranty
2 years for defects in quality
