技术参数
加入对比温度计
| 测量原理 | |
| 特性 / 应用 | 公制样式模块化温度组件快速响应时间 (缩径/锥形 tip) 螺纹式过程连接带颈部 |
| 保护套管 | 无 (不 intended 至用途带保护套管) |
| 芯子 / 探头 | 矿物绝缘 (MI), 柔性 |
| 保护套管外径 / 芯子 | 6,0 mm (0,24'') 9,0 mm (0,35'') |
| 最大插入深度(按需) | 高达 10.000,00 mm (393,70'') |
| 保护套管材质 | 1.4404 (316L) |
| 过程连接 | 外螺纹螺纹: G1/2" G3/4" G1" NPT1/2" NPT3/4" NPT1" M20x1.5 |
| 端部形状 | 缩径 |
| 表面粗糙度 Ra | 0,8 μm (31,5 μ内.) |
| 工作温度范围 | PT 100: -50 °C ...600 °C (-58 °F ...1.112 °F) |
| 最大过程压力(静压) | 在 20 °C: 20 bar (290 psi) |
| 测量精度 | 等级符合 IEC 60751 等级 AA 符合 IEC 60751 |
| 响应时间 | 取决于配置 t50 = 3 s t90 = 6 s |
| 一体化表头变送器 | 是 (4 … 20 mA; HART; PROFIBUS PA; FOUNDATION FIELDBUS) |
| 认证 | SIL (变送器仅) |
产品概述
高度模块化、坚固耐用的温度计适合几乎所有行业应用。头部选装变送器的设备兼容所有通用通信协议，可即装即用，与直接连线的传感器相比，增强了测量精确度和可靠性。多种过程连接、规格和材质提供了应用的灵活性。
-
优势
-
模块化设计，采用符合DIN EN 50446的标准接线盒和客户指定的浸入长度，灵活性高
-
芯子兼容性高，设计符合DIN 43772标准
-
短锥型端部，加快反应时间
-
头部变送器选择容易：模拟输出4至20 mA、HART®、PROFIBUS® PA或 FF现场总线
附件 / 备件 28
共 28 项备件 · 点击展开
| 订货号 | 名称 / 说明 | |
|---|---|---|
| 71044061 | 设备包2x screws, 2x springs, 2x spring rings, 1x sealing CDI-connector | 询价 |
| 71367414 | 铜密封圈Packing unit: 10 pieces | 询价 |
| 71367420 | 铜密封圈Packing unit: 10 pieces | 询价 |
| 71367424 | 铜密封圈Packing unit: 10 pieces | 询价 |
| 71367425 | 铜密封圈Packing unit: 10 pieces | 询价 |
| 71367427 | 垫片Packing unit: 10 pieces | 询价 |
| TMT180- | ***模块温度变送器 TMT180Product Phased Out. Temperature transmitter,PC-programable. Application: RTD. 2-wire 4-20mA. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed. | 询价 |
| TXU10- | 仪表调试包 TXU10用于可以PC编程调试的设备 程序设置+用于带USB接口的PC的连接线 | 询价 |
| READWIN- | Readwin 2000调试包 READWINReadwin 2000 Operation + Read. software | 询价 |
| TMT181- | ***iTEMP TMT181, Head Transmitter PCPProduct being phased out, limited availability. Temperature transmitter,PC-programmable. Application: RTD, TC, Ohm, mV. 2-wire 4-20mA, galvanic isolation. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed. | 询价 |
| FXA191- | ***Commubox FXA191Modem to connect smart devices with INTENSOR or HART protocol to personal computers. The signal circuit is intrinsically safe (Ex i a). The connection to the personal computer is realized with the inte- grated cable through the serial port. | 询价 |
| FXA195- | 通讯接口 FXA195Modem to connect HART field devices to a computer via USB. Commissioning of field devices with software tool. :: To connect to a intrinsically safe signal circuit. :: SIL2, IEC61508. | 询价 |
| TMT184- | ***iTEMP TMT184, headtransmitter PATemperature transmitter, Profibus-PA. Application: RTD, TC, Ohm, mV. Galvanic isolation. Profil V3.0. Curr. consumption 11mA Mounting: head form B, DIN43729. | 询价 |
| TMT85- | 温度变送器 TMT85Temperature transmitter with dual sensor input and advanced diagnostics for sensor monitoring. FOUNDATION Fieldbus protocol (ITK 5.0). Galvanic isolation 2 kV (sensor input to the output). Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN43729. UL listed, CSA General Purpose. | 询价 |
| TMT84- | 温度变送器 TMT84Dual sensor input. Advanced diagnostics: sensor monitoring. Galvanic isolation 2kV. Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN43729. Factory setup: CH1: Pt100, 3-wire, oC CH2: inactive Differing configuration optional selectable. | 询价 |
| TMT82- | 温度变送器 TMT822-wire temperature transmitter. Dual universal sensor input. Galvanic isolation 2kV (input/output). Application: RTD, TC, Ohm and mV. Presetting failure current high. Consider additional marine certificate requirements on application side. ::Highly reliable due to drift detection and sensor back up. ::Optional also for safety critical applications by means of SIL 2/3 acc. to IEC61508. | 询价 |
| TMT85- | 温度变送器 TMT85Temperature transmitter with dual sensor input and advanced diagnostics for sensor monitoring. FOUNDATION Fieldbus protocol (ITK 5.0). Galvanic isolation 2 kV (sensor input to the output). Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN43729. UL listed, CSA General Purpose. | 询价 |
| TMT84- | 温度变送器 TMT84Dual sensor input. Advanced diagnostics: sensor monitoring. Galvanic isolation 2kV. Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN43729. Factory setup: CH1: Pt100, 3-wire, oC CH2: inactive Differing configuration optional selectable. | 询价 |
| TMT82- | 温度变送器 TMT822-wire temperature transmitter. Dual universal sensor input. Galvanic isolation 2kV (input/output). Application: RTD, TC, Ohm and mV. Presetting failure current high. Consider additional marine certificate requirements on application side. ::Highly reliable due to drift detection and sensor back up. ::Optional also for safety critical applications by means of SIL 2/3 acc. to IEC61508. | 询价 |
| TID10- | 温度变送器显示器TID10to plug on. Dot-Matrix measured value display. 12 DIP-switches buttom side. Settings: FF: Simulation, Write Lock. PA: Bus address, Write Lock. Compatible: TMT85, TMT84. | 询价 |
| TA30E- | ***Terminal Head TA30ERetainer for terminal block or head transmitter + optional display. Cover: screwed, optional window. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). | 询价 |
| TA30H- | 接线盒 TA30HRetainer for terminal block or head transmitter + optional display. Design: explosion proof Cover: screwed, optional window. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50#150 oC (housing). Protection: IP66/68, NEMA 4X (housing). Protection Ex d/XP: IP66/67 (housing). | 询价 |
| TA30D- | 接线盒 TA30DRetainer for 2 head transmitters or terminal blocks. Cover: high, hinged. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). | 询价 |
| TA30A- | 接线盒 TA30ARetainer for terminal block or head transmitter + optional display. Cover: low, hinged, optional window. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). | 询价 |
| TA20A- | ***接线盒 TA20AProduct Phased Out. Connection head to mount a measuring insert with head transmitter or a connection socket. To be mounted on an armature or protective sleeve. Material: Aluminium epoxy resin coating Area temperature : max. +100oC; ATEX: +95oC. | 询价 |
| TA20B- | 接线盒 TA20BConnecting head to mount a measuring insert with head transmitter or a connection socket. To be mounted on an armature or protective sleeve. Material:Polyamid black Ambient temperature: max. +80 oC Protection: IP65 | 询价 |
| TA20D- | **接线盒 TA20DProduct Phased Out. Connection head to mount a measuring insert with up to two head transmitters or a connection socket and one head transmitter. For mounting on armature or protection sleeve. Material: Aluminium, varnished Ambient temperature: max. +100 oC; ATEX: +95 oC. Protection: IP66 | 询价 |
| TMT182- | ***模块温度变送器 TMT182Temperature transmitter, Protocol HART. Application: RTD, TC, Ohm, mV. 2-wire 4-20mA, SIL2, galvanic isolation Fault reaction: NAMUR NE 43. Mounting: head form B, DIN43729. UL listed. GL (German Llyod) Marine. | 询价 |
型号配置 / 参数对比
型号配置请输入产品型号进行配置
参数对比请在下面的输入框里输入需要对比的产品型号，最多支持三个产品对比
来源:Endress+Hauser网站公开信息
说明书下载 2
查看该型号全部资料服务案例
市政污水处理
市政污水处理 · 热电阻应用案例
项目概况
项目现场在城市污水处理厂的进水、生化与出水工段。客户希望在既有装置上完善热电阻配置，核心诉求是以铂电阻元件做高精度温度测量。
技术难点
真正麻烦的是：污水中含固率高、含腐蚀性组分，昼夜水量波动大，并且出水指标波动、探头易被污泥与生物膜覆盖。这些都要求热电阻在配置时按精度等级、线制与插深选 Pt100 / Pt1000。
配置方案
按温度测量组织供货与实施：按测温点位置与响应要求做温度方案。现场按精度等级、线制与插深选 Pt100 / Pt1000，并逐条核对：出水须稳定达到一级 A 标准并联网上传数据。
投运表现
完成调试后，低温段精度优势明显，工艺窗口更可控，测量数据可直接用于工艺调整与考核。
食品饮料
食品饮料 · 热电阻应用案例
现场工况
该客户属于食品饮料行业，生产装置位于配料、杀菌、灌装与 CIP 清洗工段。项目的主要任务就是以铂电阻元件做高精度温度测量。
需要解决的问题
难点在于介质多为糖浆、乳品与饮料等易结垢物料，卫生级要求高；与此同时清洗频繁，仪表必须耐受 CIP/SIP 高温碱洗。选型上必须按精度等级、线制与插深选 Pt100 / Pt1000。
我们的做法
我们采用温度测量的交付思路 — 按测温点位置与响应要求做温度方案。实施时按精度等级、线制与插深选 Pt100 / Pt1000，同时逐项校验：须满足食品安全与卫生级（3-A / EHEDG）要求。
运行结果
系统投运以来表现稳定，日常维护量明显减少 — 低温段精度优势明显，工艺窗口更可控。
化工制药
化工制药 · 热电阻应用案例
应用背景
反应釜、计量罐与成品储罐区是化工制药行业的典型工况。项目以热电阻为切入点，重点是以铂电阻元件做高精度温度测量。
工况约束
强腐蚀与防爆双重约束，仪表寿命短、停机维护成本高，而介质腐蚀性强、常带溶剂与结晶，部分区域为爆炸性环境的条件又进一步放大了这一点。因此热电阻必须按精度等级、线制与插深选 Pt100 / Pt1000。
交付方案
交付按温度测量来组织 — 按测温点位置与响应要求做温度方案。实施中按精度等级、线制与插深选 Pt100 / Pt1000，同时满足需满足防爆认证与 GMP 数据可追溯要求。
使用效果
运行结果表明：低温段精度优势明显，工艺窗口更可控，该测点的测量置信度明显提高。
电力能源
电力能源 · 热电阻应用案例
客户情况
电力能源行业的典型场景是锅炉给水、汽机凝结水与脱硫脱硝系统。本次测量对象为热电阻，工作重点是：以铂电阻元件做高精度温度测量。
面临的难点
现场工况为高温高压，蒸汽与含盐水并存，加上高温高压下测量漂移，非计划停机代价极高，常规配置很难长期胜任。方案需要按精度等级、线制与插深选 Pt100 / Pt1000。
实施方式
方案由温度测量落地：按测温点位置与响应要求做温度方案。技术要点在于按精度等级、线制与插深选 Pt100 / Pt1000，并确保符合：需满足电力行业规程与机组可用率指标。
客户收益
实际效果上，低温段精度优势明显，工艺窗口更可控，现场运维人员的工作负担随之下降。
