480004 MIQ/PS
IQ/电源模块，适用于2020和28X系统的宽范围电源，最大功率输出18 W，3个空闲的IQ SENSOR网络连接
-
Power supply modules for the IQ SENSOR NET, 230VAC or 24 V AC/DC
Module to supply voltage to the system components in the IQ SENSOR NET – thanks to the modular principle and simple installation this is individually customizable:
•Individually adaptable to the energy requirement - up to 6 modules can be installed in one system
•Simple mounting - mount anywhere in the system, stacked without additional mounting hardware
•Integrated lightning protection ensures high operational safety in any weather
The power supply modules to operate the IQ SENSOR NET are available in two models: The wide range power supply MIQ/PS for 100–240 VAC and the low-voltage power supply MIQ/24V for 24 VAC/24 VDC.
By the ability to stack these in the IQ SENSOR NET, you can quickly and easily dock these modules onto already existing ones - anywhere in the system. Therefore, you will not require any additional mounting hardware.Models
MIQ module MIQ/PS
MIQ module MIQ/24V
Order No.
480004
480006
MIQ Module Coupling at Front
Combined mechanical and electrical connection for rapid docking and removal of the MIQ/TC 2020 3G
Terminal/Controller (configurated as Terminal) and for docking additional modulesMIQ Module Coupling at Rear
Combined mechanical and electrical connection, for rapid coupling to MIQ modules, up to 3 modules as a stack mounted unit possible
Cable Feeds
4 screw cable glands M 16 x 1.5
Terminal Connections
Screw terminal strips
Terminal area for solid conductors: 0.2 ... 4.0 mm2
Terminal area for flexible conductors: 0.2 ... 2.5 mm2
accessible by opening coverIQ Sensor Net Terminal Connections
Terminal connections for the IQ Sensor Net are available on each module and can be used as required:
- for connecting sensors
- as an input/output or for looping through/branching of the IQ Sensor Net cableOther Functions
Two LEDs, yellow and red, for monitoring the operating voltage of the IQ Sensor Net; IQ Sensor Net connection, Integrated local identity function; Integrated switchable terminal resistor (SN terminator)
Electric Supply
Directly via the IQ Sensor Net
Ambient Conditions
Operating temperature: -4 °F … 131 °F (-20 °C … +55 °C); Storage temperature: -13 °F … 149 °F (-25 °C … +65 °C)
Housing Material
PC – 20 % GF (polycarbonate with 20 % fiberglass)
Protection Rating
IP67
IP 66
corresponding to NEMA 4X (not for direct conduit connections). Conduits need to be connected with flexible adapters (CC-Box), respectively with adapters CC-PM..
Dimensions (W x H x D)
5.67 x 5.67 x 2.05 in. (144 x 144 x 52 mm)
Weight
Approx. 1.1 pounds (0.5 kg)
Certifications
ETL, cETL (conforms with relevant UL and Canadian standards), CE
Electromagnetic Compatibility
EN 61326-1, Class B; FCC Class A
Integrated Overvoltage Protection
According to EN 61326-1 enhanced overvoltage protection for the entire system, implemented in each component
Connection Medium Cable
IQ Sensor Net cable SNCIQ or SNCIQ/UG (underground cable with additional PVC coating):
2-wire with shield; 2 x 0.75 mm2; Filler cord for easy connection of shield: 0.75 mm2; pressure resistant to 10 barConnection Characteristics
Energy and data transfer via 2 wire technique; resistant to reversed polarity; Comprehensive EMC shield control; cable topology within IQ Sensor Net system as required, e.g. in the form of a line, tree, star, multiple star; Total cable length: max. 1000 m/1094 yds (without signal amplifying), with signal amplifying module MIQ/JBR additional 1000 m/1094 yds (max 3000 m/3282 yds)
Warranty
3 years for defects of quality
