302501 TetraCon® 700 IQ SW

Digital IQ sensor for wastewater treatment plants, connectable to the IQ SENSOR NET

TetraCon® 700 IQ – digital 4 electrode conductivity measuring cell with flow-free operation, especially with high conductivity:

• Very large measuring range from 10 µS/cm … 500 mS/cm
• Highest linearity and very insensitive against contamination by 4-electrode system
• Rapid temperature compensation by integrated temperature sensor

This measuring technique has proven itself over the years and offers an interference-free operation, also and foremost at high conductivity values. The 4-electrode measuring cell is very insensitive to contamination. Based on the pressure resistance of up to 10 bars, there is nothing to stop you from mounting into pipes or on lines.

The sea water model includes the sensor for use in special media: All wetted parts are made of titanium and plastic and are therefore extremely resistant to corrosion.

Model	TetraCon® 700 IQ	TetraCon® 700 IQ SW*
Order No.	302500	302501
* SW: Sensor as sea water model (with plastic arming (POM))
detailed technical data see data sheet D2.04
Measuring method	4-electrode cell
Measuring range	10 µS/cm - 500 mS/cm SAL: 0 … 70 TDS: 0 … 2000 mg/l
Cell Constants	K = 0.917 cm-1, ±1.5% (in free solution) K = 0.933 cm-1, TetraCon® 700 IQ with EBST 700-DU/N flow-thru adapter	K = 0.917 cm-1, ±1.5% (in free solution)
Resolution	Depending on measuring range
Temp. measurement	-5 ... +60 °C (23 ... 140 °F); NTC
Ambient Conditions	-5 ... +60 °C (23 ... 140 °F)
Electrical connections	2-wire shield cable with quick fastener to sensor
Weight (without cable)	Approx. 1.46 lb (660 g)	Approx. 2.58 lb (1,170 g)