• 回到顶部
  • 0755-82221901
  • E+H专家
  • 加微信询价

搜索

TriOxmatic®700-7

201692 TriOxmatic® 690-15

通用D.O.传感器,用于监测/控制废水处理厂中的氧气输入,与模拟监测器一起使用。随附配件套件(ZBK 600),包括:2个。Membr。喷头(WP 600/2)、50 ml电解质溶液(ELY/A)、50毫升清洁溶液、1个阴极清洁剂(SF 300),带集成温度传感器(NTC)、15 m/49 ft电缆和防水塞
售价:
¥ 0.00
原价: ¥0.00
关注:0

服务:  现货现款・ 48小时快速处理・ 含税运。

收藏
数量:
  • Electro-chemical sensor to measure dissolved oxygen
    The TriOxmatic® with 3 electrode system for the reliable oxygen measurement - patented know-how at low investment costs:
    •Reliable operation by proven technology
    •No run in, no drift: Stable measured values from the beginning to the end
    •Self diagnosis system SensReg/SensLeck by 3 electrode system
    In the analog sensors of the TriOxmatic® series, you will find the ideal solution for your application. In addition to the continuous measuring accuracy, the sensors are equipped with an automatic self diagnosis system, a shorter response time and different cable lengths as options. Regardless of this, all models are supplied with accessories kits and can be connected to the monitor Oxi 298 (exception: TriOxmatic® 700).

    TriOxmatic® 700 – predestined for the use in biological cleaning steps (wastewater treatment plants)
    Universal oxygen sensor with high measuring accuracy and automatic self diagnosis SensReg (electrolyte consumption) and SensLeck (membrane monitoring). Based on its median response time of t90 < 180 s, the sensor is insensitive to air bubbles and therefore predestined for measurement and regulation of the oxygen content in biological cleaning steps of wastewater treatment plants. The TriOxmatic® 700 is alwo available as a salt water version.
    Nur noch als Nachrüstarmatur für analoge Umformer der Serien Ecoline® und QuadroLine®. Als digitale Version weiterhin erhältlich (IQ SENSOR NET System 181).

    TriOxmatic® 690 – suitable for pure measuring tasks in wastewater/water
    Very economic model without self diagnosis. This makes this oxygen sensor suitable especially for pure measuring tasks in wastewater/water where a continuous membrane and electrolyte monitoring is not necessary.

    TriOxmatic® 701 – increased resolution for the residual oxygen in the denitrification
    Based on the increased resolution, a shorter response time (t90 < 30 s) and the thinner special membrane, this sensor can be used for quicker response processes with lower O2 concentrations (e.g. for the measurement of residual oxygen and the denitrification).

    Model

    TriOxmatic® 690

    TriOxmatic® 701

    Order No.

    201690, 201692, 201693V

    201678, 201680, 201682V

    Measuring principle

    Electrochemical

    Measuring Range (25 °C, depends on respective controller)

     

    O2 Concentration

    0.0 ... 60.0 mg/l

    0.00 ... 20.00 mg/l; 0.0 ... 60.0 mg/l

    O2 Saturation

    0 ... 600 %

    0.0 ... 200.0 %; 0 ... 600 %

    Resolution

    O2 Concentration

    0.1 mg/l

    0.01 mg/l; 0.1 mg/l

    O2 Saturation

    1 %

    0.1 %; 1 %

    Response time at 25 °C

    t90: 180 s

    t90: 30 s; t99: 90 s

    Minimum flow rate

    0.05 m/s

    0.23 m/s

    SensCheck

    SensLeck, SensReg

    Temperature Measurement

    Integrated NTC, -5 °C ... +50 °C

    Temperature Compensation

    0 °C ... +50 °C

    Pressure Resistance

    Maximum 10 bar

    Ambient Conditions

    Operational temperature: 0 °C ... +50 °C; Storage Temperature: -5 °C ... +50 °C

    Electrical Connection

    Integrated connection cable with 7-pole screw plug (IP 65); electrical supply via WTW controller

    Electromagnetic Compatibility

    According to EN 61326 class B and FCC class A

    Certifications

    CE, cUL, UL

    Mechanical

    Membrane/
    sensor head, Protection hood

    POM

    Housing shaft

    Stainless steel 1.4571

    Protection Rating

    IP 68

    Cable

    PUR

    PU

    Weight (without cable)

    Approx. 660 g

    Warranty

    2 years on defects in quality according to § 10 terms of conditions

加入购物车

相关产品:

网站首页    现货中心    WTW    201692 TriOxmatic® 690-15