109170 SensoLyt® 700 IQ
用于pH/ORP电极的坚固数字pH/ORP传感器SensoLyt®SEA/DWA/ECA/PtA，与IQ sensor NET配合使用。内置前置放大器和温度传感器（NTC），具有SensCheck功能，无需连接电缆（请单独订购SACIQ）
-
Digital pH/ORP armature to be used with electrodes, connectable to the IQ SENSOR NET
SensoLyt®700 IQ – digital pH/ORP armature with integrated preamplifier and temperature sensor as well as lightning protection to be connected to IQ SENSOR NET:
- Stable signals by digital signal processing
- Convenient by calibration in the lab and glass breakage detection
- Reliable measured values by integrated temperature sensor
By storing calibration values within the sensor, a "pre-calibrated pH-measurement" can be generated. Due to our quick-lock, the sensor can be disconnected and - after laboratory calibration - re-connected at the site easily. Inconvenient calibrations in the field under adverse conditions can be completely eliminated if there is an IQ connection in the lab.
A special switch also allows automatic monitoring for glass breakage. The required replacement of the SensoLyt® electrode is quick and uncomplicated.
The sea water model is optimized for the use in special media: All wetted parts are made of titanium and plastic and are therefore extremely resistant to corrosion.Modele
SensoLyt® 700 IQ
SensoLyt® 700 IQ SW*
Order No.
109170
109171
Measuring method
Potentiometric
Measuring range
0,00 ... 14,00 pH (depending on the electrode)
± 2000mV (depending on the electrode)Resolution
0,01 pH
1 mVAccuracy
Depends on calibration
± 0,2 pH; ± 20 mVTemp. measurement
Integrated NTC, -5 °C ... +60 °C
Ambient conditions
Operating temperature: 0 °C ... +60 °C
Electrical connections
2-wire shield cable with quick fastener to sensor
Weight (without cable)
Approx. 970 g
Approx. 1.800 g
