网站首页 ꄲ 现货中心 ꄲ WTW ꄲ 109100 SensoLyt® SE

产品详情

Electrodes for the IQ SENSOR NET and for analog transmitters pH 298
SensoLyt® electrodes for installation in a flow vessel or in a SensoLyt® sensor:
• pH measurement in wastewater
• Fast exchange
• Easy to maintain
Electrodes with arming
The SensoLyt® electrodes with arming are easy to install and boast flexible measuring and application areas

Electrodes without arming
The SensoLyt® electrodes without arming can be connected directly to a pH monitor pH 298. Depending on the application, you can install them into a flow vessel.

SensoLyt^® Models			SEA-HP	SEA	SE	DWA	DW	ECA	EC	PtA	Pt
Order No.			109118	109115	109100	109119	109103	109117	109102	109125	105412
Reference System			Gel polymer solid electrolyte			Modified gel electrolyte		Gel electrolyte		Gel polymer solid electrolyte
Diaphragm			2-hole junction			Ceramic junction		1-hole junction		2-hole junction
Pressure Resistance		at 20 °C	10 bar	10 bar	—	10 bar	—	10 bar	—	10 bar	—
Pressure Resistance		at 60 °C	10 bar	1 bar	—	1 bar	—	1 bar	—	1 bar	—
Temperature Range			0 ... +60 °C
Measuring Range / Range of Application			4 ... 12 pH	2 ... 12 pH		0 ... 14 pH		2 ... 12 pH		±2.000 mV ***
Mechanical	Shaft		Glass
	Armor		POM	PVC-U	—	PVC-U	—	PVC-U	—	PVC-U	—
	Connection head		PPS-GF 40
	O rings		FPM (Viton)
	Watering cap		PE
Temperature sensor			Integrated in SensoLyt^® armature
Electrical Connection			Watertight plug-in system (S7)
Warranty			6 months on defects in quality according to § 10 terms of conditions

109100 SensoLyt® SE

pH combination electrode esp. suited for measurements in heavily polluted wastewater, for use in flow-thru vessel: D 700/N, D 530, D 300/pH etc. With watertight S7 plug head (IP 67); measuring range 0 … 12 pH
pH组合电极，特别适用于重污染废水的测量，用于流通容器：D 700/N、D 530、D 300/pH等。带防水S7塞头（IP 67）；测量范围0…12 pH

SensoLyt®SE

넳 넲

108542 S 200/2

Float with pendulum mounting assembly for 2 on-line sensors with 40 mm (1.57 in) shaft diameter with UA 55 extension assembly.
带摆锤安装组件的浮子，用于2个轴直径为40毫米（1.57英寸）的在线传感器，带UA 55延伸组件。

108540 S 200

Float with pendulum mounting assembly for on-line sensors with 40 mm (1.57 in) shaft diameter with UA 55 extension assembly or for spectral sensors with supplement kit VIS Set/EH for horizontal mounting.
带摆锤安装组件的浮子，用于轴直径为40毫米（1.57英寸）的在线传感器，带UA 55延伸组件，或用于光谱传感器，带用于水平安装的补充套件VIS Set/EH。

108507 AS 9-HI-6,0

Connecting cable with exposed cable ends for direct connection (high impedance) of pH electrodes to analogue monitors.Cable length 6 m (19 ft)
带有外露电缆端的连接电缆，用于pH电极与模拟监测器的直接连接（高阻抗）。电缆长度6米（19英尺）

108461 K 5 S

Coaxial electrode plug, 5 m coaxial cable, S plug (extension cable)
同轴电极插头，5米同轴电缆，S插头（延长电缆）

108455 VP 6-19/10

VP 6-pole electrode socket, 10 m cable KA 19 (1 coaxial + 3 cords), up to 266 °F (130 °C), free end
VP 6极电极插座，10米电缆KA 19（1根同轴+3根线），最高266°F（130°C），自由端

108073 D 300/pH

Flow-thru vessel for pH/ORP and temperature measuring
用于pH/ORP和温度测量的流通容器

107082 NitraLyt®Plus SET/Comp

Robust digital nitrate sensor for ion-selective electrodes (in-situ measuring), for use with the IQ SENSOR NET system, delivered with VARiON® Ref, VARiON®Plus NO3 and VARiON®Plus Cl electrodes. With built-in lightning protection, pre-amplifier and temperature sensor. Not included: SACIQ connection cable (Please order separately).
用于离子选择性电极（原位测量）的坚固数字硝酸盐传感器，与IQ sensor NET系统配合使用，与VARiON®Ref、VARiON？Plus NO3和VARiON™Plus Cl电极一起交付。内置防雷、前置放大器和温度传感器。不包括：SACIQ连接线（请单独订购）。

107080 NitraLyt®Plus 700 IQ

Robust digital nitrate sensor for ion-selective electrodes (in-situ measuring), for use with the IQ SENSOR NET system. With built-in lightning protection, pre-amplifier and temperature sensor. Not included: Electrodes VARiON® Ref, VARiON®Plus NO3, VARiON®Plus Cl and SACIQ connection cable (Please order separately).
用于离子选择性电极（原位测量）的坚固数字硝酸盐传感器，与IQ sensor NET系统配合使用。内置防雷、前置放大器和温度传感器。不包括：电极VARiON®Ref、VARiON™Plus NO3、VARiON®Plus Cl和SACIQ连接电缆（请单独订购）。

107072 AmmoLyt® Plus SET/Comp

Robust digital ammonium sensor for ion-selective electrodes (in-situ measuring), for use with the IQ SENSOR NET system, delivered with VARiON® Ref, VARiON®Plus NH4 and VARiON®Plus K electrodes. With built-in lightning protection, pre-amplifier and temperature sensor. Not included: SACIQ connection cable (Please order separately).
用于离子选择性电极（原位测量）的坚固数字铵传感器，与IQ sensor NET系统配合使用，与VARiON®Ref、VARiON™Plus NH4和VARiON？Plus K电极一起交付。内置防雷、前置放大器和温度传感器。不包括：SACIQ连接线（请单独订购）。

넳 넲

大家也在看：

版权所有：阿仪科技（深圳）有限公司地址：广东省深圳市龙华区大浪街道浪口社区华盛路175号3栋603 电话： 0755-82221901 手机： 19925440503 QQ： 382310512 邮箱： sales@ainstru.com

友情链接

服务范围

工业自动化产品专业代理，品质保证

技术领先，价格优势，报价迅速，产品全面

技术选型，产品报价，销售安装，工程售后，为您提供工业自动化一站式服务

扫一扫

扫一扫加工程师微信

Scan this QR code by WhatsApp to add me to quote

自动化专业销售

Tel. 19925440503(微信同号) WhatsApp: +86 18576429229